NAiS FP Series User Manual page 53

Installation and Wiring
Measures regarding heat discharge
Always install the unit orientated with the tool port facing outward on the bottom in order
to prevent the generation of heat.
CORRECT
Figure 23: FPΣ Installation - heat discharge
Do not install the FPΣ control unit as shown below.
Upside- down Installation which
blocks the air duct
Figure 24: FPΣ Installation direction
Do not install the unit above devices which generate heat such as heaters, transformers
or large scale resistors.
5 - 4
INCORRECT
Installations such that
the input and output
connectors face down
Input and output Horizontal
connectors on top installation of the unit
FPΣ