NAiS FP Series User Manual page 273

Specifications
Relay No. Name
R9030 Not used
R9031 Not used
R9032 COM. 1 port communication
mode flag
R9033 Print instruction execution flag Off: Printing is not executed.
R9034 Run overwrite complete flag
R9035 Not used
R9036 Not used
R9037 COM.1 port communication
error flag
R9038 COM.1 port reception done
flag during general purpose
communicating
R9039 COM.1 port transmission
done flag during general
purpose communicating
R903A High- speed counter
control flag
R903B High- speed counter
control flag
R903C High- speed counter
control flag
R903D High- speed counter
control flag
R903E Not used
R903F Not used
13 - 24
Description
This is on when the general - purpose communication function is
being used.
It goes off when the MEWTOCOL- COM or the PLC link function is
being used.
On: Execution is in progress.
This is the special internal relay that goes on for only the first scan
following completion of a rewrite during the RUN operation.
This goes on if a transmission error occurs during data
communication.
This goes off when a request is made to send data, using the F159
(MTRN) instruction.
Turns on when the end code is received during the general purpose
communicating.
This goes on when transmission has been completed when using
general - purpose communication.
It goes off when transmission is requested when using general -
purpose communication.
ch0 Turns on while the high- speed counter instructions F166 (HC15),
F167 (HC1R) and the pulse output instructions "F171 (SPDH) to
F176 (SPCH)" are executed.
ch1 Turns on while the high- speed counter instructions F166 (HC15),
F167 (HC1R) and the pulse output instructions "F171 (SPDH) to
F176 (SPCH)" are executed.
ch2 Turns on while the high- speed counter instructions F166 (HC15),
F167 (HC1R) and the pulse output instructions "F171 (SPDH) to
F176 (SPCH)" are executed.
ch3 Turns on while the high- speed counter instructions F166 (HC15),
F167 (HC1R) and the pulse output instructions "F171 (SPDH) to
F176 (SPCH)" are executed.
FPΣ