NAiS FP Series User Manual page 157

Communication Function 1 Computer Link
Setting of system register
To carry out 1:1 communication using a computer link, the system registers should be
set as shown below.
Settings when using the COM. 1 port
No. Name
No. 410 Unit No. for COM.1 port
No. 412 Communication mode for COM.1 port
No. 413 Communication format for COM.1 port
No. 415 Baud rate setting for COM.1 port
Settings when using the COM. 2 port
No. Name
No. 411 Unit No. for COM.2 port
No. 412 Communication mode for COM.2 port
Communication format for COM.2 port
No. 414
No. 415 Baud rate setting for COM.2 port
The communication format and baud rate (transmission speed) should be set to match
the connected computer.
8 - 12
Set value
1
Computer link
Character bit: . . . . 8 bits
Parity check: . . . . . Odd
Stop bit: . . . . . . . . . 1 bit
Terminator: . . . . . . CR
Header: . . . . . . . . . STX not exist
9600 bps to 115200 bps
Set value
1
Computer link
Character bit: . . . . 8 bits
Parity check: . . . . . Odd
Stop bit: . . . . . . . . . 1 bit
Terminator: . . . . . . CR
Header: . . . . . . . . . STX not exist
9600 bps to 115200 bps
FPΣ