NAiS FP Series User Manual page 269

Specifications
Item No. Name
COM. 411 Unit No. setting
2 port 2 port
Communication mode setting
412
set-
ting ting
Selection of modem connection
414 Communication format setting
415 Communication speed (Baud rate)
setting
418 Starting address for received buffer of
general (serial data) communication
mode
419 Buffer capacity setting for data re-
ceived of general (serial data) commu-
nication mode
Note
The communication format when using the PLC link is fixed at
the following settings:
the data length is 8 bits, odd parity, stop bit is 1.
The communication speed (baud rate) is fixed at 115,200 bps.
13 - 20
Default Descriptions
value
1 1 to 99
Computer link Computer link
General communication
Disabled Enabled/Disabled
Character bit: Enter the settings for the various items.
8 bits, Character bit: 7bits/8bits
Parity check: Parity chk: none/with odd/with even
"with, odd" Stop bit: 1bit/2bits
Stop bit: 1 bit The following setting is valid only when the
communication mode specified by system
register 412 has been set to "General com-
munication".
End code (Terminator): CR/CR+LF/None
Start code (Header): STX not exist/STX
exist
9600 bps 2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
2048 0 to 32764
2048 0 to 2048
FPΣ