NAiS FP Series User Manual page 286

FPΣ
Address Name
DT90123 Not used
to
DT90125
DT90126 Forced Input/
Output unit No.
DT90127 Not used
to
DT90139
DT90140 MEWNET - W0
PLC link status PLC link status
DT90141
DT90142
DT90143
DT90144
DT90145
DT90146
DT90147
DT90148 Not used
to
DT90155
DT90156 MEWNET - W0
PLC link status PLC link status
DT90157
DT90158 Not used
DT90159
DT90160 MEWNET - W0
PLC link unit No.
DT90161 MEWNET - W0
PLC link error
flag
DT90162 Not used
to
DT90169
Description
Used by the system.
The number of times the receiving operation is performed.
The current interval between two receiving operations: val-
ue in the register × 2.5ms
The minimum interval between two receiving operations:
value in the register × 2.5ms
The maximum interval between two receiving operations:
value in the register × 2.5ms
The number of times the sending operation is performed.
The current interval between two sending operations:
value in the register × 2.5ms
The minimum interval between two sending operations:
value in the register × 2.5ms
The maximum interval between two sending operations:
value in the register × 2.5ms
Area used for measurement of receiving interval.
Area used for measurement of sending interval.
Stores the unit No. of PLC link
Stores the error contents of PLC link
13.6 Table of Special Data Registers
(A: Available, N/A: Not available)
Reading
N/A
A
N/A
A
N/A
A
A
N/A
Writing
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13 - 37