NAiS FP Series User Manual page 271

Specifications
Relay No. Name
R9010 Always on relay
R9011 Always off relay
R9012 Scan pulse relay
R9013 Initial (on type) pulse relay
R9014 Initial (off type) pulse relay
R9015 Step ladder initial pulse relay
(on type)
R9016 Not used
R9017 Not used
R9018 0.01 s clock pulse relay
R9019 0.02 s clock pulse relay
R901A 0.1 s clock pulse relay
R901B 0.2 s clock pulse relay
R901C 1 s clock pulse relay
R901D 2 s clock pulse relay
R901E 1 min clock pulse relay
R901F Not used
13 - 22
Description
Always on.
Always off.
Turns on and off alternately at each scan
This goes on for only the first scan after operation (RUN) has been
started, and goes off for the second and subsequent scans.
This goes off for only the first scan after operation (RUN) has been
started, and goes on for the second and subsequent scans.
Turns on for an instant only in the first scan of the process the mo-
ment the step ladder process is opened.
Repeats on/off operations in 0.01 s cycles.
Repeats on/off operations in 0.02 s cycles.
Repeats on/off operations in 0.1 s cycles.
Repeats on/off operations in 0.2 s cycles.
Repeats on/off operations in 1 s cycles.
Repeats on/off operations in 2 s cycles.
Repeats on/off operations in 1 min cycles.
FPΣ
0.01 s
0.02 s
0.1 s
0.2 s
1 s
2 s
1 min