VeEX MTT-14B User Manual page 93

MTT-14B e_Manual D07-00-083P RevA00
C. Period. The warranty period for Hardware, Software and
Firmware will be One (1) Year from date of shipment to CUS-
TOMER. The COMPANY may also sell warranty extensions
or provide a warranty term of three years with the original
sale, which provide a longer coverage period for the test set
chassis, software and firmware, in which case the terms of the
express limited warranty will apply to said specified warranty
term.
D. Only for CUSTOMER. COMPANY makes this warranty only
for the benefit of CUSTOMER and not for the benefit of any
subsequent purchaser or licensee of any merchandise.
E. LIMITATION ON WARRANTY. THIS CONSTITUTES THE SOLE
AND EXCLUSIVE WARRANTY MADE BY COMPANY WITH
RESPECT TO HARDWARE, SOFTWARE AND FIRMWARE.
THERE ARE NO OTHER WARRANTIES, EXPRESS OR IM-
PLIED. COMPANY SPECIFICALLY DISCLAIMS THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. COMPANY'S LIABILITY UNDER
THIS AGREEMENT WITH RESPECT TO A PRODUCT, INCLUD-
ING COMPANY'S LIABILITY FOR FAILURE AFTER REPEATED
EFFORTS TO INSTALL EQUIPMENT IN GOOD WORKING
ORDER OR TO REPAIR OR REPLACE EQUIPMENT, SHALL
IN NO EVENT EXCEED THE PURCHASE PRICE OR LICENSE
FEE FOR THAT PRODUCT, NOR SHALL COMPANY IN ANY
EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUEN-
TIAL, INDIRECT, OR SPECIAL DAMAGES OF ANY KIND OR
NATURE WHATSOEVER, ARISING FROM OR RELATED TO
THE SALE OF THE MERCHANDISE HEREUNDER, INCLUD-
ING BUT NOT LIMITED TO DAMAGES ARISING FROM OR
RELATED TO LOSS OF BUSINESS, LOSS OF PROFIT, LOSS
OF GOODWILL, INJURY TO REPUTATION, OVERHEAD,
DOWNTIME, REPAIR OR REPLACEMENT, OR CHARGE-
BACKS OR OTHER DEBITS FROM CUSTOMER OR ANY
CUSTOMER OF CUSTOMER.
F. No Guaranty, Nonapplication of Warranty. COMPANY does
not guaranty or warrant that the operation of hardware, soft-
ware, or firmware will be uninterrupted or error-free. Further,
the warranty shall not apply to defects resulting from:
(1) Improper or inadequate maintenance by CUSTOMER;
(2) CUSTOMER-supplied software or interfacing;
(3) Unauthorized modification or misuse;
(4) Operation outside of the environmental specifications for
the product;
(5) Improper site preparation or maintenance; or
(6) Improper installation by CUSTOMER.
Page 93 of 101