Ping Test; Ping Test Screen - VeEX MTT-14B User Manual

Shdsl module
Table of Contents

Advertisement

MTT-14B e_Manual D07-00-083P RevA00

2.2.5.2.3 PING Test

Before running this test, the
connection must be UP as
indicated at the top right of the
screen.
This screen is the same for all
the encapsulation types. Press
F4 after configuration to start
the test. Press again to stop the
test.
The following is displayed:
ST: Indicates when the START key was pressed.
ET: Elapsed time since the START key was pressed.
LOCAL IP: Displays the LOCAL IP entered in the CONFIGURA-
TION screen, if static IP TYPE has been selected. It displays the
dynamically assigned address if DHCP or DYNAMIC IP TYPE
has been selected in the CONFIGURATION screen.
Configure the following for PING testing:
DESTINATION IP
Options: GATEWAY (F1), URL/IP ADDR (F2), LIST (F3)
Enter the Destination IP address.
• GATEWAY: Use to automatically PING the Gateway. IP address
not available in LLC-RTE and CLIPoA modes.
• IP ADDR: Use to enter a destination address. Use SHIFT
and number keypad along with
a saved IP address from the list.
• URL: Uniform Resource Locator is used to enter a destination
domain name if a DNS server is available. To enter, press URL
(F1) for a character entry screen or LIST (F2) for the DESTINA-
TION IP list.
To save a URL or IP address, use this procedure:
1. Press F2 and the in the DESTINATION IP list select a blank
line and press EDIT (F1).
2. In the character entry screen select the type of address by
pressing URL (F1) or IP ADDR (F2). If IP ADDR is selected,
this screen is replaced by a numeric entry screen.
A. Press
to select DESTINATION IP and use SHIFT, the
numeric key pad, <-- (F2) and --> (F3) to enter.
B. When finished, press F4 to save.
3. In the PING configuration screen, press
4. Press F3 to select the character grid with a cursor.
5. Use
to move the cursor to the desired character.
11:50:45
>LINK UP
ST:--:--:--
ET:---:--:--
LOCAL IP:207.181.199.106
PING TEST
DESTINATION IP:207.181.199.178
#PINGS: 0
PING LEN: 54
PING/SEC: 1
PING: -
Sent
:0
Round Trip (ms)
Recv'd :0
Crnt
:0
Unreach:0
Avg
:0
Missing:0
Max/Min:0/0
CONTINU
START
Figure 25 PING Test Screen
, or press F3 and select
to select URL.
UP<
Page 44 of 101

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rxt-2140

Table of Contents