Llc-Bridge And Routed Mode Setup; Gateway; Vpi; Encapsulation Llc - VeEX MTT-14B User Manual

MTT-14B e_Manual D07-00-083P RevA00

2.2.4.1 LLC-Bridge and Routed Mode Setup

11:50:50
>LINK UP
PING SETUP
MODE
ENCAPSULATION :LLC

VPI

VCI

IP ADDRESS
LOCAL IP
DESTINATION IP:207.181.199.177

GATEWAY

PROFILE LLC-BRG
LLC-RTE CLIPoA
PPPoE PPPoA
Figure 8 LLC-BRG PING Setup Screen
Configure these settings for LLC-BRG and LLC-RTE modes:
ENCAPSULATION
Options: LLC (F1), VC MUX (F2), AUTO (F3)
Choose the encapsulation method for carrying traffic over AAL
Type 5 over ATM.
• LLC: Logical Link Control based on IEEE standard 802.2. LLC
encapsulation is used when multiple protocol are encapsu-
lated over a single ATM Virtual Connection.
• VC MUX: This is used when only one protocol is carried over
a single ATM Virtual Connection.
• AUTO: Automatically detect the setting.

VPI

Range: 0 through 255
The default is 8, which is a typical Ethernet assignment. Along
with VCI, VPI identifies the next destination of a cell as it moves
through a series of ATM switches on the way to its destination.
The service provider typically assigns VPI.
4W STU-R<
:LLC-BRG
:8
:35
:STATIC
:207.181.199.178
:207.181.199.177
START more
START more
START more
Page 16 of 101