Pti Decode Values - VeEX MTT-14B User Manual

MTT-14B e_Manual D07-00-083P RevA00
PTI Coding
Interpretation
Bits 432
User data cell, congestion not experienced.
000
ATM user-to-user indication = 0
User data cell, congestion not experienced.
001
ATM user-to-user indication = 1
User data cell, congestion experienced.
010
ATM user-to-user indication = 0
User data cell, congestion experienced.
011
ATM user-to-user indication = 1
100 OAM F5 segment associated cell
101 OAM F5 end-to-end associated Cell
UNI - Resource management cell
110
NNI - VC resource management cell
111 Reserved for future VC functions.
after Rec. I.361, Sec. 2.2.4 and 2.3.3
Table 3 PTI Decode Values
CLP: Cell Loss Priority is one bit that may be set by the user
or the service provider to indicate lower priority cells (usually,
CLP=1); they are subject to discard before other cells.
The following F-keys are available.
PRINT (F1): Press to print the scan results.
STORE (F3): Press to store the scan results, available after STOP
is pressed.
STOP/START (F4): Press to stop scanning, press again to
start.Once a scan is started, a SCANNING progress bar is dis-
played.
Page 29 of 101