VeEX MTT-14B User Manual page 31

MTT-14B e_Manual D07-00-083P RevA00 Page 31 of 101
#CELL
Options: 1–9999
Enter the number of OAM cells to transmit by using SHIFT and
the number keypad.
TIMEOUT
Options: 1–10 seconds
Enter a value in seconds by using SHIFT and the number keypad.
This is only used for loopback (F4 or F5) cells. If no response
is received after the timeout has expired, the cells are declared
lost. This field is set to N/A for AIS and RDI (F4 or F5) since no
response is expected.
The items in the right column under OAM RECEIVE are the results
of the OAM ATM PING.
# Tx: Number of OAM cells transmitted.
Note: The following items will display N/A, unless loopback (F4
or F5) cells are received.
# Rx: Number of OAM loopback cells received.
# LOST: Number of transmitted OAM cells not received; consid-
ered lost due to the timeout.
The following items are under ROUNDTRIP (ms).
CUR: Current cell roundtrip in milliseconds.
AVG: Average cell roundtrip in milliseconds.
MAX: Maximum cell roundtrip in milliseconds.
MIN: Minimum cell roundtrip in milliseconds.
The following F-keys are available:
STORE (F2): Press to store the OAM ATM PING results.
PRINT (F3): Press to print the OAM ATM PING results.