[X]-Page Jam, Open Automatic Feeder Top Cover. [28Y.xx] - Lexmark MX310 Service Manual

3
Reload paper into the multipurpose feeder.
Note: Make sure the paper guide lightly rests against the edge of the paper.
4
From the printer control panel, touch
printer models, select Next >
[x]‑page jam, open automatic feeder top cover. [28y.xx]
1
Remove all original documents from the ADF tray.
Note: The message is cleared when the pages are removed from the ADF tray.
2
Open the ADF cover.
3
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4
Close the ADF cover.
5
Straighten the edges of the original documents, then load the original documents into the ADF, and then
adjust the paper guide.
6
From the printer control panel, touch
printer models, select Next >
to clear the message and continue printing. For non‑touch‑screen
> Clear the jam, press OK >
to clear the message and continue printing. For non‑touch‑screen
> Clear the jam, press OK >
Diagnostics and troubleshooting
97
.
.
7015