Bottom removals
Power supply removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
on page
370.
3
Disconnect the fuser cable (A) from the power supply, and disconnect the cable (B) from the left side of the
printer.
4
Position the printer so that it sits on its right side.
5
Remove the right tray guide. See
"Left cover removal" on page
"Rear exit door removal" on page 369
A
"Tray guide removal" on page
Parts removal
339
279.
and
B
366.
7015
"Rear cover removal"