Media Present Sensor Flag Removal - Lexmark MX310 Service Manual

h
Route the cable using the new path, and secure it with a cable tie (A).
Media present sensor flag removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
on page 370.
3
Remove the power supply. See
4
Remove the power supply shield. See
5
Remove the duplex. See
6
Position the printer so that it sits on its left side.
7
Remove the retainer spring (A).
8
Remove the two springs (B).
"Left cover removal" on page
"Rear exit door removal" on page 369
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
Parts removal
279.
339.
341.
355
A
and "Rear cover removal"
340.
7015