2
The protrusion on the ACM must align with the notch on the sensor flag.
3
The sensor flag must align with the media present sensor (A).
ACM assembly removal
1
Remove the left cover. See
2
Remove the rear door and cover. See
318.
3
Remove the power supply. See
4
Remove the power supply shield. See
5
Remove the duplex. See
6
Remove the media present sensor flag. See
"Left cover removal" on page
"Rear exit door removal" on page 317
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
"Media present sensor flag removal" on page
Repair information
239.
and
298.
299.
311
"Rear cover removal" on page
298.
307.
7016