Replace Defective Imaging Unit [31.Xy]; Replace Jammed Originals If Restarting Job; Replace Imaging Unit, 0 Estimated Pages Remain [84.Xy] - Lexmark MX310 Service Manual

List of printer and toner cartridge regions
Region number
0
1
2
3
4
5
9
Notes:
•
The x and y values are the .xy of the error code shown on the printer control panel.
•
The x and y values must match for printing to continue.

Replace defective imaging unit [31.xy]

Replace the defective imaging unit to clear the message. For more information, see the instruction sheet
that came with the supply.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the
User's Guide or visit www.lexmark.com.

Replace jammed originals if restarting job.

From the printer control panel, try one or more of the following:
•
Select Cancel job to clear the message and cancel the scan job. For non‑touch‑screen printer models,
press to confirm.
•
Select Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job. For non‑touch‑screen printer models, press
•
Select Scan from flatbed to continue scanning from the scanner immediately after the last successful
scan job. For non‑touch‑screen printer models, press
•
Select Finish job without further scanning to end the last successful scan job. For non‑touch‑screen
printer models, press
•
Select Restart job to restart the scan job with the same settings from the previous scan job. For
non‑touch‑screen printer models, press

Replace imaging unit, 0 estimated pages remain [84.xy]

Replace the imaging unit to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply or see the "Replacing supplies" section of the User's Guide.
Region
Global
United States, Canada
European Economic Area (EEA), Switzerland
Asia Pacific, Australia, New Zealand
Latin America
Africa, Middle East, rest of Europe
Invalid
to confirm.
Diagnostics and troubleshooting
to confirm.
to confirm.
136
to confirm.
7015