July 1, 2013
•
FRU description changed—40X8297, Pick tire (MX51x and XM1145)
•
FRU added—40X8296, Pick tire (MX31x, MX41x and XM1140)
June 19, 2013
•
Changes were made to the ADF paper jam service check.
•
Part number 40X8093 (Transfer roll) was changed to 40X8393.
•
BSD model information was added to the FRU tables on the parts catalog.
•
Some information from the error code tables were made into new service checks. The following are the
new service check topics added:
–
ADF rattling noise service check
–
Imaging unit low service check
–
Toner cartridge low service check
–
Bin full service check
–
Toner smart chip compatibility service check
–
Imaging chip compatibility service check
–
Flash full service check
–
Maintenance kit service check
–
NVRAM cyclic redundancy service check
–
Invalid firmware/controller board service check
–
RAM memory error service check
–
Scanner configuration error service check
–
Blank spaces on incoming fax service check
–
Stretched words on incoming fax service check
–
Download emulation cyclic redundancy service check
April 24, 2013
•
For the Imaging parts catalog assembly, the descriptions for the following part numbers were revised:
40X9142, 40X9143, 40X9144, 40X9093, 40X9059, 40X9057
April 4, 2013
•
Updated the ACM assembly removal procedure.
•
Added Media sensor flag removal procedure.
•
Updated the Sensor (input) early/late arriving service check to include checking of the media present sensor
flag.
•
Added media present sensor flag part number 40X8800 to the Electronics 2 parts catalog assembly.
February 4, 2013
•
10.xx and 24x.08 errors were added to the User attendance messages table.
•
24x.08 errors were added to the 24x paper jams and Input option jam error messages tables.
•
New topic for updating the firmware was added to the Service menus chapter.
•
BSD machines were added to the list of models under the General information chapter.
Change history
32
7015