Lexmark MX310 Service Manual page 115

Error code Description
243.20 Took too long to ramp up dc feed motor in tray 3. Go to
243.21 Pick motor stall in tray 3.
243.22 Tray 3 pick motor underspeed.
243.24 DC Feed ACM stalled on the last pick attempt in
tray 3.
243.32 Tray not ready.
243.33 Pick received but detected a tray pulled.
243.41 Motor 1 (Pick/Lift) Elevator motor stalled.
243.42 Motor 1 (Pick/Lift) Elevator motor PWM overflow
error (underspeed). Motor underspeed (max PWM
and motor underspeed, typical accordion jam).
243.43 Motor 1 (Pick/Lift) motor ramp (end ramp - did not
reach speed, typical pack feed paper jam).
243.44 Motor 2 (Separator/Pass through) motor stalled.
243.45 Motor 2 (Separator/Pass through) motor PWM
overflow error (underspeed). Motor underspeed
(max PWM and motor underspeed, typical
accordion jam).
243.46 Motor 2 (Separator/Pass through) motor ramp
(end ramp - did not reach speed, typical pack feed
paper jam).
243.47 Motor 3 motor stalled.
243.48 Motor 3 motor PWM overflow error (underspeed).
Motor underspeed (max PWM and motor
underspeed, typical accordion jam).
243.49 Motor 3 motor ramp (end ramp - did not reach
speed, typical pack feed paper jam).
Action
page
Diagnostics and troubleshooting
115
"Option tray jam service check" on
118.
7015