Lexmark MX310 Service Manual page 31

February 28, 2014
•
Added the Restoring solutions, licenses, and configuration settings topic under Removal precautions.
•
Updated the Restoring the printer configuration after replacing the controller board topic.
•
Changed the title from eSF backup to Backing up eSF solutions and settings, and updated the topic.
•
Updated the Controller board removal topic.
•
Editorial changes
January 17, 2014
•
Restore factory defaults topics were added to the service menus.
•
Updating the printer firmware topics were added to the repair information.
November 28, 2013
•
Part number 40X8850 (Redrive shaft) was added to the parts catalog.
•
Redrive shaft removal was added to the repair information.
•
Part numbers for controller boards were replaced:
–
40X9065 (Controller board (MX31x) to 40X9251
–
40X9066 (Controller board (MX31x) to 40X9252
–
40X9067 (Controller board (MX31x) to 40X9253
October 22, 2013
•
Part number 40X9146 (Maintenance kit, 220 V) was replaced with 40X9136.
•
Part number 40X9654 (550‑‑sheet tray, lockable) was added.
August 20, 2013
•
Fax card (40X7854) was included in the parts catalog.
August 13, 2013
•
Topic for restoring the printer configuration after replacing the controller board was added.
•
Additional procedure added for the installation note for the controller board removal topic.
•
The following Diagnostic information topics were added:
–
[x] page jam, clear standard bin. [20y.xx]
–
201 paper jam messages
–
Sensor (narrow media) jam service check
July 22, 2013
•
Parts catalog FRU descriptions were revised to include model information:
–
40X9055—Flatbed (MX51x and XM1145)
–
40X9056—Flatbed (MX31x, MX41x, and XM1140)
July 11, 2013
•
Parts catalog FRUs were added:
–
40X8698—Relocation kit (MX310 and MX410)
–
40X8699—Relocation kit (MX510)
Change history
31
7015