Adf/Scanner Hardware Errors; 8Yy Error Messages - Lexmark MX310 Service Manual

ADF/Scanner hardware errors

8yy error messages

Error code
840.01
840.02
840.03
841.xx
842.xx
843.00
843.01
843.02
843.03
843.04
843.05
843.06
843.99
849.01
849.10
Description
The scanner is disabled and can't be used. Go to
The scanner is disabled and can't be used.
This message is posted when the MFP
PORs. Enter the configuration menu, and
reenable the scanner module.
The scanner is disabled and can't be used.
This message is posted when the MFP
PORs. Enter the configuration menu, and
reenable the scanner module.
Scanner failure—front side image
processing ASIC. Invalid configuration or
ASIC not found
Scanner failure—communications
Scanner Failure—carriage failed to Home or
move to desired position
ADF mechanical failure
Generic Mechanical failure detected
Pick Roller Engage Failure
Pick Roller Disengage Failure
Carriage overrun
ADF nudger
Scanner complete timeout error
Configuration error—the device had modem
installed, but configID indicates it should not.
Configuration error—the device had HD
installed, but configID indicates it should not.
Diagnostics and troubleshooting
Action
"Scanner disabled error service
check" on page
Go to "Scanner disabled error service
check" on page
Go to "Scanner disabled error service
check" on page
Image pipeline ASIC. See
check" on page
home position service check" on
page 185.
Go to "CCD service check" on page
184.
Go to "Scanner carriage failure service
check" on page
Go to "ADF service check" on page
181.
Go to "ADF service check" on page
181.
Go to "ADF service check" on page
181.
Go to "ADF service check" on page
181.
Go to "ADF service check" on page
181.
Go to "ADF service check" on page
181.
Go to "ADF service check" on page
181.
Go to "Scanner configuration error
service check" on page
Go to "Scanner configuration error
service check" on page
178
7015
179.
179.
179.
"CCD service
184. Also, see "Flatbed
180.
182.
182.