Skewed print check
Actions
Step 1
Check the guides in the tray where the skewed prints are sourced
from.
Note: If paper is sourced from the MPF, then proceed to
Does the position of the guides match the paper loaded?
Step 2
Adjust the guides to match the paper loaded.
Does the problem remain?
Step 3
Check if the printer supports the paper loaded.
Note: For a complete list of supported paper, see the printer
User's Guide.
Is the paper supported?
Step 4
Remove the paper, and then load a supported one.
Does the problem remain?
Step 5
Check the tray pick roller for excess wear and contamination.
Is the pick roller free from excess wear and contamination?
Step 6
Replace the pick roller. See
Does the problem remain?
"Pick roller removal" on page
Diagnostics and troubleshooting
66
Yes
Go to step 3.
step
9.
Go to step 3.
Go to step 5.
Go to step 5.
Go to step 7.
Go to step 7.
403.
7015
No
Go to step 2.
The problem is
solved.
Go to step 4.
The problem is
solved.
Go to step 6.
The problem is
solved.