Removing The Pcb Cover; Removing The Process Tray Paper Sensor; Finisher Controller Pcb - Canon imageRUNNER iR2270 Service Manual

[5]
[4]
F-3-144
3.4.3.7 Removing the
Process Tray Paper
Sensor
1) Disconnect the connector [1] and
remove the sensor [2].
[1]
F-3-145
[4]
[2]
[3]
[1]
0008-1212
[2]

3.4.4 Finisher Controller PCB

3.4.4.1 Finisher Controller PCB
3.4.4.1.1
Removing
PCB Cover
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[3]
[2]
F-3-146
3) Remove the 2 screws [1] and detach the
PCB cover [2].
[1]
]
F-3-147
Chapter 3
the
0008-1015
[1]
3-43