Canon imageRUNNER iR2270 Service Manual page 95

Chapter 3
finisher controller PCB [1].
2) Remove the 2 screws [2] and remove the
finisher controller PCB together with the
mount [3].
[2]
[3]
[1]
F-3-140
3) Detach the timing belt [1].
F-3-141
4) Remove the 4 screws [1] and remove the
drive unit [2].
3-42
[1]
[2]
[1]
F-3-142
3.4.3.6
Removing the
Process Tray Unit
1) Remove the 2 screws [1] and remove the
inlet guide [2].
F-3-143
2) Remove the 2 screws [1] and remove the
process tray unit (right) [2] and stay [3].
3) Remove the 2 screws [4] and remove the
process tray unit (left) [5].
[1
0008-1205
[2]
[1]