Canon imageRUNNER iR2270 Service Manual page 61

Chapter 3
3.2.1.3 Removing the
Upper Cover
1) Remove the screw [1] on the back of the
finisher and detach the top cover (rear) [2].
[2]
F-3-23
2) Disconnect the 2 connectors [1] and then
remove the harness from the upper cover
[2].
F-3-24
3-8
0008-1046
[1]
3) Remove the 3 screws [1] and detach the
upper cover [2].
F-3-25
3.2.1.4 Removing the
Stapler Cover
1) Remove the screw [1] and detach the
stapler cover [2].
[1]
F-3-26
[1]
0008-1051
[2]