Process Tray Assembly - Canon imageRUNNER iR2270 Service Manual

Chapter 3
3.3.1.7 Removing the
Stapler Cover
1) Remove the screw [1] and detach the
stapler cover [2].
[1]
F-3-91
3.3.1.8 Removing the
Stack Tray Assembly
1) Remove the 2 screws [1] and detach the
harness cover [2].
[1]
[1]
F-3-92
2) Disconnect the connector [1] on the
3-28
0008-0744
[2]
0008-0741
[2]
back of the finisher, remove the harness [2]
from the harness guide, and then remove
the reusable band [3].
[2]
[1]
F-3-93
3) Turn the dial [1] and remove the stack
tray assembly [2].
[1]
F-3-94

3.3.2 Process Tray Assembly

3.3.2.1 Removing the
PCB Cover
1) Open the front cover [1] of the finisher.
[3]
[2]
0008-1020