Canon imageRUNNER iR2270 Service Manual page 66

3) Remove the 2 screws [1] and detach the
left cover [2].
[1]
F-3-42
3.2.3 Stapler
3.2.3.1 Removing the
PCB Cover
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[3]
3) Remove the 2 screws [1] and detach the
PCB cover [2].
[1]
]
0008-1027
3.2.3.2
1) Remove the 3 screws [1], release the 2
hooks [2], and then detach the top harness
cover [3].
[2]
F-3-43
F-3-44
Removing the
Top Harness Cover
Chapter 3
[1]
0008-1028
3-13