Canon imageRUNNER iR2270 Service Manual page 82

2) Pull the lever [2] and draw out the
finisher.
[3]
[2]
F-3-95
3) Remove the 2 screws [1] and detach the
PCB cover [2].
[1]
]
F-3-96
3.3.2.2 Removing the
Top Harness Cover
1) Remove the 3 screws [1], release the 2
hooks [2], and then detach the top harness
cover [3].
[2]
[1]
F-3-97
3.3.2.3
1) Remove the screw [1] on the back of the
finisher and detach the top cover (rear) [2].
0008-1021
[3]
Removing the
Upper Cover
Chapter 3
[1]
[1]
0008-1022
3-29