Canon imageRUNNER iR2270 Service Manual page 84

finisher controller PCB [1].
2) Remove the 2 screws [2] and remove the
finisher controller PCB together with the
mount [3].
[2]
[3]
[1]
F-3-102
3) Detach the timing belt [1].
F-3-103
4) Remove the 4 screws [1] and remove the
drive unit [2].
[1]
[2]
[1]
F-3-104
3.3.2.6
Removing the
Process Tray Unit
1) Remove the 2 screws [1] and remove the
inlet guide [2].
F-3-105
2) Remove the 2 screws [1] and remove the
process tray unit (right) [2] and stay [3].
3) Remove the 2 screws [4] and remove the
process tray unit (left) [5].
Chapter 3
[1
0008-1025
[2]
[1]
3-31