Offset Roller Control - Canon imageRUNNER iR2270 Service Manual

Chapter 2

2.3.3 Offset Roller Control

0007-5485
a. Paper feed
The offset roller [1] is driven by the feed motor (M2). When specified time lapses after
paper is fed by the feed roller [2], the offset solenoid [3] is turned off to feed the paper
toward the stack tray with the offset roller [1]. After the trailing edge of the paper passes
through the feed roller, only the offset roller [1] is used to feed the paper.
[3]
M2
[1]
F-2-13
When specified time lapses after the paper is fed by the feed roller, the offset solenoid [2]
is turned off to lower the offset roller [1], feeding the paper only with the offset roller [1].
When specified time lapses again, the feed motor (M2) turns reversely to rotate the offset
roller [1] in the direction that draws the paper into the process tray.
2-10