Canon imageRUNNER iR2270 Service Manual page 107

Chapter 3
3) Remove the 2 screws [1] and detach the
PCB cover [2].
[1]
]
F-3-182
3.4.9.2
Removing the
Top Harness Cover
1) Remove the 3 screws [1], release the 2
hooks [2], and then detach the top harness
cover [3].
3-54
[2]
0008-1185
F-3-183
3.4.9.3
1) Remove the screw [1] on the back of the
finisher and detach the top cover (rear) [2].
[3]
Removing the
Upper Cover
[1]
[1]
0008-1192