5.4.2 Punch Waste Case Overflow
Fault
The punch waste case
has started to overflow.
T-5-4
Description
Timing of detection
After a punch
at time of a punching session
waste case full
condition has been
detected, the
sensor has gone on
as long as 300
punching
operations are
executed.
-The punch waste
sensor is on at the
rising edge of the
24-V power
system. (The
machine will
assume that the
waste case is
missing.)
Chapter 5
0008-2061
Resetting
Remove the
punch waste
from the waste
case in the
compartment.
5-5