Canon imageRUNNER iR2270 Service Manual page 91

Chapter 3
[2]
[1]
F-3-127
3.4.1.7
Removing the
Process Tray Unit
1) Remove the 2 screws [1] and remove the
inlet guide [2].
F-3-128
2) Remove the 2 screws [1] and remove the
process tray unit (right) [2] and stay [3].
3) Remove the 2 screws [4] and remove the
process tray unit (left) [5].
3-38
[1
F-3-129
3.4.1.8
0008-1229
1) Disconnect the connector [1] and
remove the sensor [2].
[2]
[1]
F-3-130
[4]
[5]
[4]
Removing the
Stack Tray Paper
Surface Sensor
[2]
[2]
[3]
[1]
0008-1230
[1]