Canon imageRUNNER iR2270 Service Manual page 106

F-3-178
3.4.8.4
Removing the
Offset HP Sensor
1) Disconnect all connectors from the
finisher controller PCB [1].
2) Remove the 2 screws [2] and remove the
finisher controller PCB together with the
mount [3].
[2]
[3]
[1]
F-3-179
3) Remove the screw [1] and detach the
sensor cover [2].
4) Disconnect the connector [3] and
remove the sensor [4].
[3]
[2]
[1]
F-3-180
3.4.9 Tray Clock Sensor
0008-1219
3.4.9.1
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[3]
[4]
Removing the
PCB Cover
[2]
F-3-181
Chapter 3
[1]
0008-1172
[1]
3-53