Canon imageRUNNER iR2270 Service Manual page 113

Chapter 3
3.4.11 Paper Holder Solenoid
3.4.11.1 Removing the
PCB Cover
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[3]
[2]
F-3-202
3) Remove the 2 screws [1] and detach the
PCB cover [2].
[1]
]
F-3-203
3-60
3.4.11.2 Removing the
1) Remove the 3 screws [1], release the 2
hooks [2], and then detach the top harness
0008-1073
cover [3].
[2]
[1]
F-3-204
3.4.11.3 Removing the
1) Remove the screw [1] on the back of the
finisher and detach the top cover (rear) [2].
Top Harness Cover
[3]
Upper Cover
0008-1074
[1]
[1]
0008-1075