Offset Motor; Removing The Pcb Cover - Canon imageRUNNER iR2270 Service Manual

Chapter 3
finisher controller PCB [1].
2) Remove the 2 screws [2] and remove the
finisher controller PCB together with the
mount [3].
[2]
[3]
[1]
F-3-58
3) Detach the timing belt [1].
F-3-59
4) Remove the 4 screws [1] and remove the
drive unit [2].
3-18
[1]
[2]
[1]
F-3-60

3.2.5 Offset Motor

3.2.5.1
Removing the
PCB Cover
1) Open the front cover [1] of the finisher.
2) Pull the lever [2] and draw out the
finisher.
[3]
[2]
F-3-61
3) Remove the 2 screws [1] and detach the
PCB cover [2].
[1
0008-1033
[1]