Firmware Version 1.0.5.19; Firmware Version 1.0.5.14; Firmware Version 1.0.4.7 - Grandstream Networks UCM6100 Series User Manual


Added voicemail password and Email address for voicemail group extension.

Added auto record support for ring group and call queue.

Added VFax file display, download and delete interface in web UI.

Changed web page name from "Hardware Config" to "Ports Config".

Added payload configuration for audio/video codecs. [INTERNAL OPTIONS/PAYLOAD]

Added activity calls status on web UI status page.

Added CDR API support. [API CONFIGURATION]

Added more alert events support such as Register SIP Failed, Register SIP Trunk Failed, Restore
Config, User Login Success, User Login Failed, SIP Internal Call Failure and etc. [ALERT EVENTS
LIST]

FIRMWARE VERSION 1.0.5.19


Added built-in data migration tool to support upgrading from 1.0.4.7 to 1.0.5.19 without factory reset.

Added "Direct Dial Voicemail Prefix" feature code back. [Table 76: UCM6100 Feature Codes]

Changed valid range for option "Current Disconnect Threshold". [Table 48: Analog Trunk Configuration
Parameters]

FIRMWARE VERSION 1.0.5.14


New backend data structure and web UI performance improvement. 1.0.5.14 is not compatible with
previous firmware versions. Once upgraded to 1.0.5.14, the device needs to be FULLY RESET and
RE-CONFIGURED MANUALLY.

Added traditional Chinese language for web UI. [WEB GUI LANGUAGES]

Updated LDAP configuration example. [LDAP SERVER]

Added "Enable Filter Source Caller ID" and "Custom Dynamic Route" options for outbound route
settings. [Table 57: Outbound Route Configuration Parameters]

Added more language support for voice prompt. [LANGUAGE SETTINGS FOR VOICE PROMPT]

Added "Ring Group Destination" for ring group configuration. [Table 67: Ring Group Parameters]

Added "Extension Groups" section in web UI. [EXTENSION GROUPS]

Added "Pickup Groups" section in web UI. [PICKUP GROUPS]

Added BLF function description. [BLF AND EVENT LIST]

Updated default extension range. [Table 77: Internal Options/General]

Added sample descriptions for downloaded CDR file. [DOWNLOADED CDR FILE]

FIRMWARE VERSION 1.0.4.7


Asterisk updated to version 1.8.23.1.

Added DID routing support for incoming calls. [Table 50: Create New SIP Trunk]

Added DOD routing support. [DIRECT OUTWARD DIALING (DOD)]

Added GXP one-button Voicemail access. [Table 34: SIP Extension Configuration Parameters]
Firmware Version 1.0.10.39 UCM6100 Series IP PBX User Manual Page 23 of 331