Sterilization cycle management
RUN A STERILIZATION CYCLE IMMEDIATELY
In the homepage tap the desired
1
cycle.
LISA | Instructions for use | VA131 ENG Rev. 05 | 31/07/2018 | © 2018 W&H Sterilization Srl
Check the cycle requirements.
2
Check the icon in the top left corner
3
of the page to know the ECO DRY
mode assigned to the cycle.
Tap
:
4
to change the ECO DRY mode
n
(see "Change the ECO DRY
mode" on page 62).
to disable the ECO DRY mode
n
(see "Set the drying time" on
page 61).
If the door seal is new, hold the
5
door gently closed until step 7.
Tap
and enter your credentials if
6
required: the door locks. If you have
not set a different start time, the
sterilization starts immediately.
Sterilization cycles
57