Sterilization Cycle Management - W&H Lisa VA131-17 Instructions For Use Manual

Sterilization cycle management

RUN A STERILIZATION CYCLE IMMEDIATELY
On the homepage tap the desired
1
cycle.
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
Check the cycle requirements.
2
Check the icon in the top left corner
3
of the page to know the ECO DRY
mode assigned to the cycle.
Tap :
4
to change the ECO DRY mode
n
(see "Change the ECO DRY
mode" on page 66).
to disable the ECO DRY mode
n
(see "Set the drying time" on
page 65).
If the door gasket is new, hold the
5
door gently closed until step 7.
Tap and enter your credentials if
6
required: the door locks. If you have
not set a different start time, the
sterilization starts immediately.
Sterilization cycles
61