Maintenance
Monthly or 50-cycle maintenance
CLEANING THE DOOR SEAL AND THE CHAMBER FACE SIDE
Proceed as follows:
Clean the seal seat and the chamber face side with a damp, lint-free cloth
1
moistened with clean water.
Notice:
Do not use abrasive products, cutting tools or sharp objects.
If you use a detergent solution, be careful not to get in contact with the plastic
body of the front cover.
Rinse with clean water.
2
Note: when the seal is new it might be necessary to hold the door gently closed at the
sterilization start.
76
LISA | Instructions for use | VA131 ENG Rev. 05 | 31/07/2018 | © 2018 W&H Sterilization Srl