Running A Sterilization Cycle - W&H MS Instructions For Use Manual

6. Running a sterilization cycle

Place the sterilization load in the sterilizer chamber and close the door.
Switch the sterilizer ON by pressing the mains switch behind the service door.
See ANNEX 2 on how to properly prepare and place the load.
The start screen will show the default sterilization program, preceded by the cursor.
(The default cycle program can be changed by the advanced user; see Chapter 5 – Programming).
To select a different cycle program scroll the available options by pressing
UP or DOWN.
Select the desired cycle program by pressing OK.
25