Sterilization Cycle Management - W&H Lexa MN-111 Instructions For Use Manual

Turn the sterilizer ON: after the initialization the homepage
5
appears.
GENERAL RECOMMENDATIONS
Follow these recommendations to obtain the most from the drying:
Ensure the paper side of the sterilization bags faces up, and
n
that the space in-between bags is enough.
To enjoy the full benefit of short cycle times when only one
n
tray is used, always place the load on the upper tray of the
chamber rack and remove all other trays from the chamber.
Lexa | Instructions for Use | MN-111 ENG Rev14 | 03/04/2023 | © W&H Sterilization Srl

Sterilization cycle management

RUN A STERILIZATION CYCLE
Note: if the user management and the label printer functions are enabled,
you might be requested to enter your PIN code during the following
procedure.
Sterilization cycles
49