Safety information
TAMPERING
Do not remove the name plate or labels from the
n
sterilizer.
Repairs, maintenance or service must be carried
n
out by service technicians authorized by the
manufacturer and using genuine spare parts
only.
REQUIREMENTS
If the sterilizer is connected to a water supply
n
system, this must be fitted with a backflow
preventing device complying to IEC 61770.
10
Responsibility
USER RESPONSIBILITY
The user is responsible for the proper installation, the correct
n
use and maintenance of the sterilizer in accordance with these
Instructions for Use.
The safety devices of the sterilizer are impaired when the
n
product itself is not installed, used and serviced in accordance
with these Instructions for Use.
The Instructions for use updated to the latest version is always
n
available at www.wh.com.
Keep manuals for future reference.
n
MANUFACTURER RESPONSIBILITY
The manufacturer can only accept responsibility for the safety,
n
reliability and performance of the product when the product
itself is installed, used and serviced in accordance with the
instructions for use.
Servicing by unauthorized persons invalidates all claims under
n
warranty and any other claims.
LISA | Instructions for use | VA131 ENG Rev. 05 | 31/07/2018 | © 2018 W&H Sterilization Srl