Sterilization cycles
Tap
or
to increase the
4
minutes or decrease them.
Note: for the minimum value of the
drying time for each cycle see
"Sterilization cycles" on page 108.
Tap
to confirm and go back to
5
the previous page. This becomes
the new fixed value.
CHANGE THE ECO DRY MODE
In the homepage tap the cycle and
1
.
Tap the leaf icon to set the ECO DRY
2
mode.
62
Tap the ECO DRY mode you desire.
3
Tap
to confirm and go back to
4
the previous page.
Tap
to go back to the homepage.
5
VIEW THE CYCLE PARAMETERS
You can check the real time cycle parameters or the cycle
parameters at the end of the cycle. Following is an example:
While the sterilization cycle is
1
running or when cycle ends tap :
the cycle information page opens.
Tap or to scroll the pages.
2
LISA | Instructions for use | VA131 ENG Rev. 05 | 31/07/2018 | © 2018 W&H Sterilization Srl