Table of Contents
Advertisement
ECO-B MODE (AVAILABLE ONLY WITH ACTIVATION CODE)
ECO-B is a cycle option designed to reduce the cycle duration and
the overall energy consumption, providing a fast type B cycle for a
limited load weight (max. 0.5 kg of unwrapped, bagged,
single/double wrapped items).
The ECO-B option is available for the B Universal 134 and B Extended
134 cycles only.
WARNING! For your safety and the safety of your patients
never exceed the maximum load weight limits as this
could impair the sterilization process.
Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl
Sterilization cycle management
B-TYPE CYCLES ACTIVATION
Note: If you have entered the All in One activation code in Special Codes
menu, the function is already available.
To activate the B-type cycles is required the B cycles activation
code. To require the activation code please refer to the activation
code instructions.
To activate the cycle proceed as follows:
On the homepage, tap
1
Enter the activation code issued by the manufacturer and tap
2
to confirm: on the homepage the B-type cycles appears.
RUN A STERILIZATION CYCLE IMMEDIATELY
On the homepage, tap the desired cycle.
1
Check the cycle requirements and load the sterilizer.
2
If the door gasket is new, hold the door gently closed until the
3
beginning of the cycle.
Select the ECO mode based on the weight of the load to be
4
sterilized.
Sterilization cycles
>
>
.
51
Advertisement
Table of Contents
