Getting started
SET THE NETWORK ADDRESS
Refer to your network administrator or IT manager for more
information about your network.
If your network supports dynamic IP, skip this procedure. Otherwise
follow this procedure and enter the data suggested by your network
administrator or IT manager.
In the homepage tap
1
>
In IP Configuration tap Static: the
2
text boxes is enabled.
Enter the data: the frames highlight.
3
If a frame turns dark grey, check
and correct the entered data.
In DNS Configuration tap Static: the
4
text boxes is enabled.
Enter the data: the frames highlight.
5
If a frame turns dark grey, check
and correct the entered data.
30
>
>
User authentication
PIN MANAGEMENT
PIN "0000" is assigned as default to each new user. It has to be
changed at the first login. When the PIN is reset the default value
"0000" is reassigned.
CHANGE YOUR PIN
Change your PIN the first time you use the sterilizer and if your PIN
has been reset. This will prevent other users to use your account.
In the homepage tap
1
Tap your user name.
2
Enter your current PIN and tap
3
to confirm.
Tap
.
4
LISA | Instructions for use | VA131 ENG Rev. 05 | 31/07/2018 | © 2018 W&H Sterilization Srl
>
>