Sterilization Cycle Phases - W&H Lisa VA131-17 Instructions For Use Manual

Technical data

Sterilization cycle phases

COMMON LEGEND OF THE STERILIZATION CYCLE PHASES
Following is the description of the sterilization phases.
Code Description
PHE Pre-heating of the sterilizer. This phase is not considered a part of the cycle.
PV1 - PV3 Vacuum pulse (removal of air from the sterilizer chamber/load)
PV1 - PV6
PP1 - PP2 Pressure pulse (steam generation)
PP1 - PP5
PPH Rise to the Plateau/Sterilization phase
PR Process (Plateau/Sterilization phase)
DV Vacuum drying
Short phase to clean the circuit from used water
SEP
LEV
Leveling. Pressure inside the sterilization chamber is leveled to the atmospheric pressure.
END End of the cycle
112 LISA | Instructions for use | VA131 ENG Rev. 05 | 31/07/2018 | © 2018 W&H Sterilization Srl