There are four sterilization cycles available, all of them complying with the European Standard EN13060:
three B-type cycles
n
one S-type cycle
n
Cycle
Cycle name Purpose
type
B
B Universal
For all your general items like hand instruments, handpieces, forceps, etc.
134
B Extended
Features an extended sterilization time, if this is required for your load or mandated in your country.
134
B Universal
For all items that cannot withstand the high temperatures of the 134 cycles, such as textiles and plastics.
121
S
S Fast 134
For fast processing of unwrapped instruments only, including dental turbines and handpieces, solid, and hollow B (simple hollow items). It is not suitable
for textiles, porous or bagged/wrapped items.
After the cycle is completed, the sterilizer could perform two drainage periods of about 30 seconds each.
The instruments sterilized with this cycle cannot be stored: they must be used immediately after being sterilized.