Label Printer Usage - W&H Lisa VA131-17 Instructions For Use Manual

Tap the text box and enter the IP
7
address previously noted.
Tap to confirm.
8
From the sterilizer to which the
9
printer is connected, confirm the
printer sharing.
Tap to print a test label again.
10
LISA | Instructions for use | VA131 ENG Rev. 05 | 31/07/2018 | © 2018 W&H Sterilization Srl

Label printer usage

CAUTION! For your safety and the safety of your patients use
a storage time compliant with the recommendations of the
manufacturers of the containters/packaging used, and with
applicable norms and rules.
AUTOMATIC PRINTING OPTION
The automatic printing option permits to automatically print a
preset number of labels after a successful sterilization cycle. The
labels are printed only after the user has identified him/herself (with
password if required) and the load has been checked and released,
if these options have been enabled by the administrator.
For the automatic label printing, a maximum storage time in weeks
can be set. This value is used to calculate the expiry date to be
printed on the labels (see "Label content description" on page 43).
Managing printers
41