Table of Contents
Advertisement
Rev 3.0B Feb.08
Using a Terminal Application
with AT Commands
You can access and configure your Raven using a terminal
application such as Microsoft HyperTerminal, PuTTY, or
similar. The following directions are for HyperTerminal which
is part of a standard installation of Windows XP.
Start > All Programs > Accessories > Communications > HyperTer‐
minal
Figure 5-13: HyperTerminal
1. Choose a name and icon for your
connection.
a.
Choose a name for your connection, such as Raven or
Sierra Wireless AirLink Solutions. The name and icon are
only for your own reference so you can find the
connection at a later date.
Tip: If you want to have a connection saved for both local and
remote, it is recommended the connection name reflect the
connection type, i.e. Raven local.
b.
Select OK.
Configuring your Raven
42
Advertisement
Table of Contents
