Table of Contents
Advertisement
Raven iDEN
114
•
email=email address (maximum: 30 characters).
*SMTPPW=pw
Sets the password to use when authenticating the email
account (*SMTPFROM) with the server (*SMTPADDR).
•
pw= password
Note: Not required to use SMTP settings but may be required by your
cellular carrier.
*SMTPSEND=email[body]
Sends an email to the address specified, followed by the body
of the email message. The email message is terminated and
sent by entering a . or Ctrl‐Z on an empty line. Cannot be
configured with AceManager.
•
email=email address
•
body=message body
*SMTPSTATUS?
Returns the status of the last issued SMTP message
(*SMTPSEND). If no status is available 0 is returned. Once
read, the status is cleared out. The status codes returned come
from the SMTP server to which that the modem sent the
request. Unless the receiving server is not standard, they
follow the RFC for SMTP. Cannot be used with AceManager.
Example:
354 = send in progress
250 = sent ok
*SMTPSUBJ=subject
Allows configuration of the default Subject to use if one isnʹt
specified in the message by providing a "Subject: xxx" line as
the initial message line.
•
subject=message subject
*SMTPUSER=user
The email account username to authenticate with the SMTP
server (*SMTPADDR) for sending email.
•
user=username (maximum: 40 characters).
Note: Not required to use SMTP settings but may be required by your
cellular carrier.
20070914
Advertisement
Table of Contents
